Filter
Top Products
FastScan and FlexTest Reference Manual, V8.6_4
2-118
Add Tied Signals Command Dictionary
• floating_object_name
A required repeatable string that specifies the floating nets or pins to which
you want to assign a specific value. The tool assigns the tied value to all
floating nets or pins in all modules that have the names that you specify.
If you do not specify the -Pin option, the tool assumes the name is a net name.
If you do specify the -Pin option, the tool assumes the name is a pin name.
• -Pin
An optional switch specifying that the floating_object_name argument that
you provide is a floating pin name.
Examples
The following example ties all floating signals in the circuit that have the net
names vcc and vdd, to logic 1 (tied to high):
add tied signals 1 vcc vdd
Related Commands
Delete Tied Signals
Report Tied Signals
Setup Tied Signals