FastScan and FlexTest Reference Manual, V8.6_4
2-254
Read Modelfile Command Dictionary
Examples
The following example initializes the memory states of a RAM gate, so you can
perform an ATPG run:
read modelfile model.ram /p1.ram
set system mode atpg
add faults
-all
run
Here is an example of an initialization file (range 0-1f):
0 / a;
1-f / 5;
10 / 1a;
11-1f / a;
You can use an asterisk (*) for an address range. For example, if all the addresses
have the same data value, then the address would look like the following:
* / a;
If there is another address and data value on a subsequent line, the subsequent
value overwrites the address with the specified data value. For example, the
following shows how to place the data value “a” in addresses 0 and 10-1f while
placing the data value “5” in addresses 1-f:
* / a;
1-f / 5;
Related Commands
Create Initialization Patterns (FS)
Write Modelfile
Set Ram Initialization (FS)