Filter
Top Products
Command Dictionary Set Iddq Checks
FastScan and FlexTest Reference Manual, V8.6_4
2-503
• -ALl
An optional switch that specifies to perform all checks.
• -Bus
An optional switch that specifies not to allow contention conditions on bus
gates.
• -WEakbus
An optional switch that specifies not to allow contention conditions on weak-
bus gates.
• -Int_float
An optional switch that specifies not to allow a Z-state on internal buses.
• -EXt_float
An optional switch that specifies not to allow a Z-state on external buses.
• -Pull
An optional switch that specifies not to allow contention conditions on pull
gates.
• -Clock
An optional switch that specifies not to allow clock pins to be on during the
IDDQ measure.
For FlexTest, the pin constraints of all clock inputs must not be at an on state at
the last timeframe of each test cycle. Otherwise, the tool cannot perform an
IDDQ measurement.
• -WRite
An optional switch that specifies not to allow write control pins to be on during
the IDDQ measure.
For FlexTest, the pin constraints of all write control inputs can not be at an on
state at the last timeframe of each test cycle. Otherwise, the tool cannot
perform an IDDQ measurement.
• -REad
An optional switch that specifies not to allow read control pins to be on during
the IDDQ measure.