Filter
Top Products
FastScan and FlexTest Reference Manual, V8.6_4
2-28
Abort Interrupted Process Command Dictionary
Abort Interrupted Process
Tools Supported: FlexTest
Scope: All modes
Prerequisites: The Set Interrupt Handling command must be on and you must
interrupt a FlexTest command with a Control-C.
Usage
ABOrt INterrupted Process
Description
Aborts a command placed in suspended state by a Control-C interrupt while the
Set Interrupt Handling command is on.
The Abort Interrupted Process command aborts a FlexTest command that you
previously interrupted by pressing the Control-C keys. This removes the
interrupted command from the suspend-state and returns control to FlexTest.
Examples
The following example enables the suspend-state interrupt handling, begins an
ATPG run, and (sometime before the run completes) interrupts the run:
set interupt handling on
set system mode atpg
add faults -all
run
<Control-C>
Now with the Run suspended, the example continues by reporting all the
untestable faults to the display and then aborts the Run:
report faults faultlist -class ut
abort interrupted process
Related Commands
Resume Interrupted Process Set Interrupt Handling