FastScan and FlexTest Reference Manual, V8.6_4
A-2
Timing Command Summary Timing Command Dictionary
Table A-1. Timing Command Summary
Command/Statement
F
S
F
T
Description
SET BIDI_FORCE TIME
•
Sets bidirectional pin force time for each
timeframe.
SET CYCLE
•
Extends the non-scan cycle duration to
ensure stability without adding extra
timeframes.
SET
END_MEASURE_CYCLE
TIME
••
Ensures that the primary output measure is
the last event of the test cycle and moves
the measure_sco event to the end of the
previous test cycle. This command cannot
be used with patterns containing a capture
clock. Use the Set Split_measure_cycle
Time command for patterns that contain a
capture clock.
SET FIRST_FORCE TIME
•
Sets input pin force time for the first
timeframe.
SET FORCE TIME
•
Sets input pin force time for each
timeframe.
SET MEASURE TIME
•
Sets output pin measure time for each
timeframe.
SET PROCEDURE FILE
••
Specifies which test procedure files to use
during pattern save.
SET SINGLE_CYCLE TIME
••
Enables timing rules checking to ensure a
single time exists for both scan and non-
scan test cycles.
SET SKEW_FORCE TIME
•
Specifies input pin force time for particular
pins in each timeframe.