FastScan and FlexTest Reference Manual, V8.6_4
A-46
SET MEASURE TIME Timing Command Dictionary
Figure A-9 shows when the output pin measures occur based on this example.
Figure A-9. SET MEASURE Timing Example
You could use these measure times in conjunction with the force times specified
in the SET FORCE TIME example. In the first 150ns test cycle, the measure times
occur at 15, 38, 65, and 135ns. In the second test cycle, the measure times occur at
150 plus the specified offsets; that is, 165, 188, 215, and 285ns.
Related Commands
SET END_MEASURE_CYCLE
TIME
SET PROCEDURE FILE
SET SPLIT_BIDI_CYCLE TIME
Measure times (for test cycle 1)
cycle starts
cycle ends
15NS
38NS
65NS
135NS
0NS
150NS