Filter
Top Products
Command Dictionary Redo Display
FastScan and FlexTest Reference Manual, V8.6_4
2-257
Redo Display
Tools Supported: DFTInsight, FastScan, and FlexTest
FastScan Scope: All modes
FlexTest Scope: Setup and Drc modes
Prerequisites: You must have the optional DFTInsight application invoked, you
must have issued an Undo command, and not have added or deleted any
instances to or from the schematic since the undo.
Usage
REDo DIsplay [level]
DFTInsight Menu Path:
Display > Redo > One Level | N Levels
Description
Nullifies the schematic view effects of an Undo command.
The Redo Display command nullifies the number of Undo Display commands that
you specify. This restores the DFTInsight schematic view prior to the last nullified
Undo Display command.
The maximum undo history level is 19.
Arguments
• level
An optional positive integer that specifies the number of Undo Display
commands that you want to nullify. The integer value cannot exceed the
number of qualified Undo Display commands. A qualified Undo Display
command is one that has not been followed by any other command that added
or deleted any instances to or from the netlist. The default level is 1.
Examples
The following series of examples shows how to display several different
schematics, each overwriting the last, and then how to undo and redo the
schematic displays.