Filter
Top Products
Command Dictionary Load Faults
FastScan and FlexTest Reference Manual, V8.6_4
2-235
• pin_pathname
The third column must be the pin pathname.
• cell_name
The fourth column is the cell name enclosed in parenthesis. When present,
this column indicates the type of cell in which the fault resides.
• net_name
The fifth column is the net name enclosed in parenthesis. When present,
this column indicates the net in which the fault resides.
When you issue this command, the tool discards all patterns in the current test
pattern set.
Comments cannot be on the end of a fault information line. If a fault information
line is greater than 5 columns, the tool does not add the fault on that line to the
faultlist.
Arguments
• filename
A required string that specifies the name of the file containing the fault list that
you want to load.
• -Restore
An optional switch that specifies for the tool to retain the fault class of each
fault that is in the fault list.
When you read in a fault class and try to maintain the fault classes within the
fault file, the following rules apply:
o If the fault class is EQ, the tool uses the fault class of the previous fault
in the file.
Note
Comments must be on a line by themselves.