Filter
Top Products
FastScan and FlexTest Reference Manual, V8.6_4
2-20
Command Summary Command Dictionary
Set Multiple Load
•
Specifies how the tool handles multiple scan
loads.
Set Net Dominance
••
Specifies the fault effect of bus contention on
tri-state nets.
Set Net Resolution
••
Specifies the behavior of multi-driver nets.
Set Nonscan Model
•
Specifies how FlexTest classifies the behavior
of non-scan cells with the HOLD and INITX
functionality during the operation of the scan
chain.
Set Number Shifts
•
Sets the number of shifts for loading or
unloading the scan chains.
Set Observation Point
•
Specifies the observation point for random
pattern fault simulation.
Set Observe Threshold
•
Specifies the minimum number of
observations necessary for the Analyze
Observe command to consider a point
adequately observed.
Set Output Comparison
•
Specifies whether FlexTest performs a good
circuit simulation comparison.
Set Output Mask
•
Specifies how FlexTest handles an unknown
(X) state in an external pattern set.
Set Pathdelay Holdpi
•
Specifies whether the ATPG keeps non-clock
primary inputs at a constant state after the first
force.
Set Pattern Source
••
Specifies the source of the patterns for future
Run commands.
Table 2-1. Command Summary [continued]
Command
D
F
T
I
F
S
F
T
Description