FastScan and FlexTest Reference Manual, V8.6_4
A-1
Appendix A
Timing Command Dictionary
This appendix contains descriptions of FastScan and FlexTest timing file
commands. Each tool’s commands appear in separate sections.
• “FastScan Timing Commands” on page A-3 describes the FastScan timing
commands.
• “FlexTest Timing Commands” on page A-32 describes the FlexTest timing
commands.
The “Timing Command Summary” section, which follows, presents a summary of
all the timing commands for both applications.
For information on the methods FastScan and FlexTest use for defining test
pattern timing and performing timing rules checking, refer to “Test Pattern
Formatting and Timing” in the Scan and ATPG Process Guide.
Timing Command Summary
Table A-1 contains a summary of all the timing commands described in this
appendix.
The two columns that separate the command name and the description indicate
which tools support the timing command. The table uses the following tool
acronyms:
FS = FastScan FT = FlexTest