Filter
Top Products
Command Dictionary Delete Cone Blocks
FastScan and FlexTest Reference Manual, V8.6_4
2-165
Delete Cone Blocks
Tools Supported: FastScan and FlexTest
Scope: Setup mode
Prerequisites: You must add output pins names to the clock and effect cone list
with the Add Cone Blocks command before you can delete them.
Usage
DELete COne Blocks pin_pathname... | -All
Description
Removes the specified output pin names from the user-created list which the tool
uses to calculate the clock and effect cones.
The Delete Cone Blocks command deletes output pins added to the tool’s internal
clock and effect cone list with the Add Cone Blocks command. The tool uses
these output pins as blockage points for calculating clock and effect cones. You
can generate a report on the current output pins in the user-defined list by using
the Report Cone Blocks command.
Arguments
• pin_pathname
A repeatable string that specifies the output pin pathname that you want the
tool to remove from the user-defined list that it uses when calculating the clock
and effect cones.
• -All
A switch that removes all the pins from the user-defined list. Unless you create
new user-specified blockages with the Add Cone Blocks command, the tool
returns to using the output pins it chooses by default for the clock and effect
cone calculations.