Filter
Top Products
Command Dictionary Report Scan Cells
FastScan and FlexTest Reference Manual, V8.6_4
2-365
Report Scan Cells
Tools Supported: FastScan and FlexTest
Scope: Atpg, Fault, and Good modes
Usage
REPort SCan CElls [-
All | chain_name...]
Description
Displays a report on the scan cells that reside in the specified scan chains.
The Report Scan Cells command provides a report on the scan cells within
specific scan chains. The report provides the following information for each scan
cell:
• Chain cell index number, where 0 is the scan cell closest to the scan-out pin.
• Scan chain and the scan chain group in which the scan cell resides
• Memory element type
• Inversion data
• Gate index number
• Instance name
• Model name
• Cell input and output pins
If you issue the command without specifying any arguments, then the tool
displays a report on the scan cells for all scan chains.
Note
Although scan cells are listed in the order of nearest-to-output
first, the latch elements inside one cell are not listed in that order
(in fact, the master is always listed first).