Filter
Top Products
FastScan and FlexTest Reference Manual, V8.6_4
2-318
Report Gates Command Dictionary
The following describes the fields for the Test behavior message line:
Test behavior: Stability=vvvv tiex_flag=v read_only_flag=v ramseq_flags=v/v(vv)
Identifies whether FastScan treats the
RAM as a tieX gate. The possible
values are:
Identifies whether FastScan can test the
RAM in read_only mode. The possible
Identifies the following stability behavior
for a given RAM, respectively:
write control stability
write load stability
The possible values are:
S (stable)
U (unstable)
read control stability
read load stability
0 (no)
1 (yes)
values are:
0 (no)
1 (yes)
Identifies the FastScan ram_sequential
capabilities for a given RAM:
test the RAM in ram_sequential mode
use held output values in a separate pre-load.
The values can be either of the following:
0 (no)
1 (yes)
RAM write values are unstable during seq_transparent procedures.
RAM read values are unstable during seq_transparent procedures.
v/v
that identifies whether FastScan
can exercise either of the following
(vv) Two values indicating the stability behavior for a given RAM
during seq_transparent procedures, respectively:
ram_sequential capabilities:
Two values separated by a “/”