Filter
Top Products
Command Dictionary Add Atpg Functions
FastScan and FlexTest Reference Manual, V8.6_4
2-39
• function_name
A repeatable string that specifies the name of another function you created
with the Add Atpg Functions command. The function_name argument cannot
be the same as any pin name in the design.
• -Cell cell_name {pin_name | net_name (FlexTest Only)}
A repeatable switch with a corresponding pair of strings that specify the name
of a DFT library cell and the name of a specific net (FlexTest Only) or pin on
that cell. You can repeat the pin_name or net_name argument if you need to
constrain multiple pins or nets on a cell.
If you use the -Cell option, the tool places an ATPG function on every
occurrence of that cell within the design.
• net_pathname (FlexTest Only)
A repeatable string that specifies the pathname to the net on which you are
placing the function. You cannot put ATPG functions on a net in any library
modules.
Examples
The following example creates an ATPG function and then uses it in an Add Atpg
Constraints command:
add atpg functions and_b_in and /i$144/q /i$141/q /i$142/q
add atpg constraints 1 and_b_in
Related Commands
Add Atpg Constraints
Delete Atpg Functions
Report Atpg Functions