Filter
Top Products
Command Dictionary Report Pin Constraints
FastScan and FlexTest Reference Manual, V8.6_4
2-353
Report Pin Constraints
Tools Supported: FastScan and FlexTest
Scope: All modes
Usage
For FastScan
REPort PIn Constraints
For FlexTest
REPort PIn Constraints [-All | primary_input_pin...]
Description
Displays the pin constraints of the primary inputs.
The Report Pin Constraints command displays the pin constraints added to the
primary inputs with the Add Pin Constraints command.
The Report Pin Constraints command, as does the Add Pin Constraints command,
performs slightly differently depending on whether you are using FastScan or
FlexTest. The following paragraphs described how the command operates for
each tool.
FastScan Specifics
The command displays the constraints on all the primary inputs which you
restricted to be at a constant value during the ATPG process.
FlexTest Specifics
The command displays the cycle behavior constraints of the specified primary
inputs. If you do not specify any primary input pins, the command displays the
constraints of all the primary inputs. You can change the cycle behavior
constraints of the primary inputs by using either the Add Pin Constraints or Setup
Pin Constraints commands.