Filter
Top Products
Switching Commands
104
ProSafe Managed Switch
show authentication methods
This command displays information about the authentication methods.
Format show authentication methods
Mode
The following is an example of this command:
Login Authentication Method Lists
________________________________
Console_Default: None
Network_Default:Local
Enable Authentication Lists
_____________________
Console_Default: Enable None
Network_Default:Enable
Line Login Method List Enable Method Lists
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
https : Local
dot1x :
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
Term Definition
Time Stamp
The exact time at which the event occurs.
Interface
Physical Port on which the event occurs.
Mac-Address
The supplicant/client MAC address.
VLAN assigned
The VLAN assigned to the client/port on authentication.
VLAN assigned
Reason
The type of VLAN ID assigned, which can be Guest VLAN, Unauth, Default, RADIUS
Assigned, or Monitor Mode VLAN ID.
Auth Status
The authentication status.
Reason
The actual reason behind the successful or failed authentication.
Privileged EXEC