Filter
Top Products
Routing Commands
301
ProSafe Managed Switch
router-id (OSPF)
This command sets a 4-digit dotted-decimal number uniquely identifying the router ospf id.
The <ipaddress> is a configured value.
Format router-id <ipaddress>
Mode
redistribute (OSPF)
This command configures OSPF protocol to allow redistribution of routes from the specified
source protocol/routers.
Default
• metric—unspecified
• type—2
• tag—0
Format redistribute {rip | static | connected} [metric <0-16777214>]
[metric-type {1 | 2}] [tag <0-4294967295>] [subnets]
Mode
no redistribute
This command configures OSPF protocol to prohibit redistribution of routes from the
specified source protocol/routers.
Format no redistribute {rip | static | connected} [metric] [metric-type]
[tag] [subnets]
Mode
maximum-paths (OSPF)
This command sets the number of paths that OSPF can report for a given destination where
maxpaths is platform dependent.
Default
Format maximum-paths <maxpaths>
Mode
no maximum-paths
This command resets the number of paths that OSPF can report for a given destination back
to its default value.
Format no maximum-paths
Mode
Router OSPF Config
Router OSPF Config
Router OSPF Config
4
Router OSPF Config
Router OSPF Config