Filter
Top Products
ipv4-routing
dual-ipv4-and-ipv6
Management Commands
715
ProSafe Managed Switch
no sdm prefer
Use this command to return to the default template.
Format no sdm prefer
Mode
sdm prefer (Mixed Stacking)
Use this command to specify the SDM template to stack with the following switches.
GSM7328S V2H1,GSM7352S V2H1,GSM7228PS V1H1,GSM7228PS V1H1
Format sdm prefer {ipv4-routing smb | dual-ipv4-and-ipv6 { smb |
data-center-smb}
Mode
ipv4-routing
dual-ipv4-and-ipv6
.
show sdm prefer
Use this command to view the currently active SDM template and its scaling parameters, or
to view the scaling parameters for an inactive template. When used with no optional
keywords, this command lists the currently active template and the template that will become
active on the next reboot, if it is different from the currently active template. If the system
boots with a non-default template and you clear the template configuration either using
no
sdm prefer or by deleting the startup configuration, show sdm prefer lists the default
template as the next active template.
Parameter Description
Supports IPv4 routing only.
-data-center enterprise: Support more ECMP next hops in IPv4 routes.
-data-center plus-enterprise: Same as data-center except with more IPv4
routes and ARP entries in enterprise mode.
-enterprise: Support more IPv4 routes and ARP entries with less ECMP next hops.
Supports both IPv4 and IPv6 routing.
This option is visible only when the switch supports IPv6 and IPv4 routing.
-data-center-enterprise: Support both IPv4 and IPv6 with more ECMP next hops.
-enterprise: Support both IPv4 and IPv6 routing.
Global Config
Global Config
Parameter Description
Supports IPv4 routing only.
-smb: Reduces all IPv4 table sizes for compatibility with the legacy switches.
Supports both IPv4 and IPv6 routing.
This option is visible only when the switch supports IPv6 and IPv4 routing.
-smb: Reduces all IPv4 and IPv6 table sizes for compatibility with the legacy switches.