Filter
Top Products
Captive Portal Commands
755
ProSafe Managed Switch
max-output-octets
Use this command to configure the maximum number of octets the user is allowed to receive.
After this limit has been reached the user will be disconnected. The number of octets is in
bytes. 0 indicates limit not enforced Use the “no”.
Default 0
Format max-output-octets <0-4294967295>
Mode
no max-output-octets
Use this command to reset the limit to the default.
Format no max-output-octets
Mode
max-total-octets
Use this command to configure the maximum number of octets the user is allowed to
transfer; that is, the sum of octets transmitted and received. After this limit has been reached
the user will be disconnected. The number of total octets is in bytes. 0 indicates limit not
enforced. Use the “no” form of this command to reset the limit to the default.
Default 0
Format max-total-octets <0-4294967295>
Mode
no max-total-octets
Use this command to reset the limit to the default.
Default 0
Format max-total-octets <0-4294967295>
Mode
session-timeout (Captive Portal)
Use this command to configure the session timeout for a captive portal configuration. After
this limit has been reached, the user will be disconnected. Timeout is time in seconds. 0
indicates timeout not enforced.
Default 0
Format session-timeout <0-86400>
Mode
Captive Portal Instance mode
Captive Portal Instance mode
Captive Portal Instance mode
Captive Portal Instance mode
Captive Portal Instance mode