Filter
Top Products
time
Quality of Service (QoS) Commands
516
ProSafe Managed Switch
no iscsi aging time
This command is to reset the aging time to the default.
Format no iscsi aging time
Mode
show iscsi
This command displays the iSCSI settings.
Format show iscsi
Mode
• Privileged EXEC
• User EXEC
Example:
The following example displays the iSCSI settings.
Console # show iscsi
iSCSI enabled
iSCSI vpt is 5, remark
Session aging time: 60 min
Maximum number of sessions is 256
-----------------------------------------------------------
iSCSI targets and TCP ports:
---------------------------
TCP Port Target IP Address Name
860
3260
5000
30001 172.16.1.1 iqn.1993-11.com.disk-vendor:diskarrays.sn.45678.tape:sys1.xyz
30033 172.16.1.10
30033 172.16.1.25
show iscsi sessions
The show iscsi sessions Privileged EXEC mode command displays the iSCSI sessions.
Format show iscsi sessions [detailed]
Mode
• Privileged EXEC
• User EXEC
Default
Term Definition
The number in minutes a session is not active prior to it's removal. (Range: 1-43,200)
Global Config
If not specified, sessions are displayed in short mode (not detailed)