NETGEAR GSM7228PS-100NAS Switch User Manual


 
Utility Commands
596
ProSafe Managed Switch
internally allocated buffer area for export to a PC host for protocol analysis. Public domain
packet analysis tools like Ethereal can be used to decode and review the packets in detail.
Capturing can be performed in a variety of modes, either transmit-side only, receive-side only,
or both. The number of packets captured will depend on the size of the captured packets.
capture {start|stop}
Use the command capture start to manually start capturing CPU packets for packet
trace. Capturing packets is stopped automatically when 128 packets are captured and have
not yet been displayed during a capture session. It is guaranteed that packets not displayed
and not saved will not be lost when capturing is in progress. Use the command capture
stop to manually stop capturing CPU packets for packet trace before the moment when 128
packets are captured and capturing packets is stopped automatically.The packet capture
operates in three modes:
Capture file
Remote capture
Capture line
The command is not persistent across a reboot cycle.
Format capture {start|stop} {transmit|receive|all}
Mode
capture {file|remote|line}
Use this command to configure file capture options. The command is persistent across a
reboot cycle.
Default
Format capture {file|remote|line}
Mode
Privileged EXEC
Remote
Global Config