Filter
Top Products
Stacking Commands
32
ProSafe Managed Switch
no nsf
This command disables non-stop forwarding on the stack.
show nsf
This command displays global and per-unit information on NSF configuration on the stack.
Format nsf
Mode Stack Global Config
Format no nsf
Mode Stack Global Config
Format show nsf
Mode Privileged EXEC
Term Definition
NSF Administrative
Status
Whether nonstop forwarding is administratively enabled or disabled. Default:
Enabled
NSF Operational
Status
Indicates whether NSF is enabled on the stack.
Last Startup Reason The type of activation that caused the software to start the last time:
• “Power-On” means that the switch rebooted. This could have been caused by a
power cycle or an administrative “Reload” command.
• “Administrative Move” means that the administrator issued the
movemanagement command for the stand-by manager to take over.
• “Warm-Auto-Restart” means that the primary management card restarted due to
a failure, and the system executed a nonstop forwarding failover.
• “Cold-Auto-Restart” means that the system switched from the active manager to
the backup manager and was unable to maintain user data traffic. This is usually
caused by multiple failures occurring close together.
Time Since Last
Restart Time
The time since the current management unit became the active management unit.
Restart in progress Whether a restart is in progress.
Warm Restart Ready Whether the system is ready to perform a nonstop forwarding failover from the
management unit to the backup unit.
Copy of Running
Configuration to
Backup Unit: Status
Whether the running configuration on the backup unit includes all changes made
on the management unit. Displays as Current or Stale.