Filter
Top Products
Management Commands
699
ProSafe Managed Switch
radius server retransmit
Use this command to configure the global parameter for the RADIUS client that specifies the
number of transmissions of the messages to be made before attempting the fall back server
upon unsuccessful communication with the current RADIUS authenticating server. When the
maximum number of retries are exhausted for the RADIUS accounting server and no
response is received, the client does not communicate with any other server.
Default
Format radius server retransmit <retries>
Mode
no radius server retransmit
Use this command to set the value of this global parameter to the default value.
Format no radius server retransmit
Mode
radius server timeout
Use this command to configure the global parameter for the RADIUS client that specifies the
timeout value (in seconds) after which a request must be retransmitted to the RADIUS server
if no response is received. The timeout value is an integer in the range of 1 to 30.
Default
Format radius server timeout <seconds>
Mode
retries
no radius server timeout
Use this command to set the timeout global parameter to the default value.
Format no radius server timeout
Mode
4
Global Config
Field Description
retries
The maximum number of transmission attempts in the range of 1 to 15.
Global Config
5
Global Config
Field Description
Maximum number of transmission attempts in the range <1-30>.
Global Config