Filter
Top Products
Format
Mode
Switching Commands
86
ProSafe Managed Switch
no private-group name
This command is used to remove the specified private group.
Format
Mode
show private-group
This command displays the private groups’ information.
Format
Mode
Private VLAN
The Private VLANs feature separates a regular VLAN domain into two or more subdomains.
Each subdomain is defined (represented) by a primary VLAN and a secondary VLAN. The
primary VLAN ID is the same for all subdomains that belong to a private VLAN. The
secondary VLAN ID differentiates subdomains from each other and provides Layer 2 isolation
between ports of the same private VLAN. The types of VLANs within a private VLAN are as
follows:
• Primary VLAN—Forwards the traffic from the promiscuous ports to isolated ports,
community ports and other promiscuous ports in the same private VLAN. Only one
private-group name <privategroup-name> [<groupid>] [mode {community|isolated}]
Global Config
private-group name <privategroup-name>
Global Config
show private-groupname [<private-group-name>|<private-group-id>|port <unit/slot/port>]
Privileged EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Port VLANID
The VLAN ID associated with the port.
Private Group
ID
Total number of private groups is 192.
Private Group
Name
The name string can be up to 24 bytes of non-blank characters
Private Group
The mode can be either “isolated” or “community”.