Filter
Top Products
Routing Commands
274
ProSafe Managed Switch
show ip vrrp
This command displays whether VRRP functionality is enabled or disabled on the switch. It
also displays some global parameters which are required for monitoring. This command
takes no options.
Format show ip vrrp
Modes
• Privileged EXEC
• User EXEC
Admin Mode
Router
Checksum
Errors
Router Version
Errors
Router VRID
Errors
Authentication
Failure
The total number of VRRP packets received that don't pass the authentication check.
IP TTL errors
The total number of VRRP packets received by the virtual router with IP TTL (time to live)
not equal to 255.
Zero Priority
Packets
Received
The total number of VRRP packets received by virtual router with a priority of '0'.
Zero Priority
Packets Sent
The total number of VRRP packets sent by the virtual router with a priority of '0'.
Invalid Type
Packets
Received
The total number of VRRP packets received by the virtual router with invalid 'type' field.
Address List
Errors
The total number of VRRP packets received for which address list does not match the
locally configured list for the virtual router.
Invalid
Authentication
Type
The total number of VRRP packets received with unknown authentication type.
Authentication
Type Mismatch
The total number of VRRP advertisements received for which 'auth type' not equal to
locally configured one for this virtual router.
Packet Length
Errors
The total number of VRRP packets received with packet length less than length of VRRP
header.
Term Definition
The administrative mode for VRRP functionality on the switch.
The total number of VRRP packets received with an invalid VRRP checksum value.
The total number of VRRP packets received with Unknown or unsupported version
number.
The total number of VRRP packets received with invalid VRID for this virtual router.
Term Definition