Filter
Top Products
Switching Commands
222
ProSafe Managed Switch
MAC Database Commands
This section describes the commands you use to configure and view information about the
MAC databases.
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The
<seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Default
Format bridge aging-time <10-1,000,000>
Mode
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format no bridge aging-time
Mode
UDP Port Mode
May be enabled or disabled. The factory default is disabled.
SIPDIP Mode
May be enabled or disabled. The factory default is disabled.
SMACDMAC
Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag Mode
May be enabled or disabled. The factory default is disabled.
TCP FIN&URG&
PSH Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag &
Sequence Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN & FIN
Mode
May be enabled or disabled. The factory default is disabled.
TCP Fragment
Mode
May be enabled or disabled. The factory default is disabled.
TCP Offset
Mode
May be enabled or disabled. The factory default is disabled.
300
Global Config
Global Config
Term Definition