Filter
Top Products
Switching Commands
152
ProSafe Managed Switch
ip dhcp snooping database
Use this command to configure the persistent location of the DHCP Snooping database. This
can be local or a remote file on a given IP machine.
Default
Format ip dhcp snooping database {local|tftp://hostIP/filename}
Mode
ip dhcp snooping database write-delay
Use this command to configure the interval in seconds at which the DHCP Snooping
database will be persisted. The interval value ranges from 15 to 86400 seconds.
Default
Format ip dhcp snooping database write-delay <in seconds>
Mode
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
Format no ip dhcp snooping database write-delay
Mode
ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
Format ip dhcp snooping binding <mac-address> vlan <vlan id> <ip address>
interface <interface id>
Mode
no ip dhcp snooping binding <mac-address>
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Format no ip dhcp snooping binding <mac-address>
Mode
local
Global Config
300 seconds
Global Config
Global Config
Global Config
Global Config