Filter
Top Products
Routing Commands
294
ProSafe Managed Switch
no default-information originate (OSPF)
This command is used to control the advertisement of default routes.
Format no default-information originate [metric] [metric-type]
Mode
default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
Format default-metric <1-16777214>
Mode
no default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
Format no default-metric
Mode
distance ospf (OSPF)
This command sets the route preference value of OSPF in the router. Lower route preference
values are preferred when determining the best route. The type of OSPF route can be
intra, inter, or external. All the external type routes are given the same preference
value. The range of <preference> value is 1 to 255.
Default
Format distance ospf {intra-area <1-255> | inter-area <1-255> | external
<1-255>}
Mode
no distance ospf
This command sets the default route preference value of OSPF routes in the router. The type
of OSPF can be intra, inter, or external. All the external type routes are given the same
preference value.
Format no distance ospf {intra-area | inter-area | external}
Mode
Router OSPF Config
Router OSPF Config
Router OSPF Config
110
Router OSPF Config
Router OSPF Config