Filter
Top Products
Multicast VLAN Registration (MVR)
234
ProSafe Managed Switch
no mvr mode
This command sets the mode type to the default value.
mvr querytime
This command sets the MVR query response time.
no mvr querytime
This command sets the MVR query response time to the default value.
mvr vlan
This command sets the MVR multicast VLAN.
no mvr vlan
This command sets the MVR multicast VLAN to the default value.
mvr immediate
This command enables MVR immediate leave mode. MVR has two modes of operating with the
IGMP Leave messages: normal leave and immediate leave:
• In normal leave mode, when a leave is received, the general IGMP query is sent from a
Layer 2 switch to the receiver port, where the leave was received. Then reports are
Format no mvr mode
Mode Global Config
Format mvr querytime<1-100>
Mode Global Config
Default 5
Format no mvr querytime
Mode Global Config
Format mvr vlan <1-4094>
Mode Global Config
Default 1
Format no mvr vlan
Mode Global Config