Filter
Top Products
Captive Portal Commands
760
ProSafe Managed Switch
If the interface is specified, the following terms are displayed.
Group Name
Redirect URL
Mode
Redirect URL
Session Timeout
Idle Timeout
Max Bandwidth
Up
Max Bandwidth
Down
Max Input Octets
Max Output
Octets
Max Total Octets
Example
(switch)#show captive-portal configuration status
CP ID CP Name Mode Protocol Verification
----- ---------- -------- -------- ------------
1 cp1 Enable https Guest
2 cp2 Enable http Local
3 cp3 Disable https Guest
(switch)#show captive-portal configuration 1 status
CP ID.......................................... 1
CP Name........................................ cp1
Mode........................................... Enabled
Protocol Mode.................................. https
Verification Mode.............................. Guest
Group Name..................................... group123
Redirect URL Mode.............................. Enabled
Redirect URL................................... www.cnn.com
Session Timeout (seconds)...................... 86400
Idle Timeout (seconds)......................... 600
Max Bandwidth Up (bytes/sec)................... 0
Max Bandwidth Down (bytes/sec)................. 0
Max Input Octets (bytes)....................... 0
Max Output Octets (bytes)...................... 0
Max Total Octets (bytes)....................... 0
Term Definition
The name of the group associated with this captive portal instance.
The redirect mode for this captive portal instance
The redirect URL is up to 512 characters.
Logout once session timeout is reached (seconds).
Logout once idle timeout is reached (seconds).
Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send
data into the network.
Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive
data from the network.
Maximum number of octets the
user is allowed to transmit.After this limit has been reached the user will be
disconnected.
Maximum number of octets the user is allowed to receive. After this limit has been
reached the user will be disconnected.
Maximum number of octets the user is allowed to transfer (sum of octets transmitted
and received). After this limit has been reached the user will be disconnected.