NETGEAR GSM7228PS-100NAS Switch User Manual


 
Stacking Commands
24
ProSafe Managed Switch
Note: The Standby Management Unit cannot be the current Management
Unit. The Standby unit should be a management-capable unit.
slot
This command configures a slot in the system. The <unit/slot> is the slot identifier of the
slot. The <cardindex> is the index into the database of the supported card types,
indicating the type of the card being preconfigured in the specified slot. The card index is a
32-bit integer. If a card is currently present in the slot that is unconfigured, the configured
information will be deleted and the slot will be re-configured with default information for the
card.
Note: Card index can be obtained by executing show supported cardtype
command in User EXEC mode.
no slot
This command removes configured information from an existing slot in the system.
Note: Card index can be obtained by executing show supported cardtype
command in User EXEC mode.
set slot disable
This command configures the administrative mode of the slot(s). If you specify [all], the
command is applied to all slots, otherwise the command is applied to the slot identified by
<unit/slot>.
If a card or other module is present in the slot, this administrative mode will effectively be
applied to the contents of the slot. If the slot is empty, this administrative mode will be applied
Format slot <unit/slot> <cardindex>
Mode Global Config
Format no slot <unit/slot> <cardindex>
Mode Global Config