Filter
Top Products
Quality of Service (QoS) Commands
483
ProSafe Managed Switch
For set-dscp-transmit, a <dscpval> value is required and is specified as either an integer
from 0 to 63, or symbolically through one of the following keywords: af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
For set-prec-transmit, an IP Precedence value is required and is specified as an integer from
0-7.
For set-cos-transmit an 802.1p priority value is required and is specified as an integer from
0-7.
Format police-simple {<1-4294967295> <1-128> conform-action {drop |
set-prec-transmit <0-7> | set-dscp-transmit <0-63> |
set-cos-transmit <0-7> | transmit} [violate-action {drop |
set-prec-transmit <0-7> | set-dscp-transmit <0-63> |
set-cos-transmit <0-7> | transmit}]}
Mode
Incompatibilities
police-two-rate
This command is the two-rate form of the police command and is used to establish the
traffic policing style for the specified class. For each outcome, the only possible actions are
drop, set-cos-as-sec-cos, set-cos-transmit, set-sec-cos-transmit, set-dscp-transmit,
set-prec-transmit, or transmit. In this two-rate form of the police command, the conform
action defaults to send, the exceed action defaults to drop, and the violate action defaults to
drop. These actions can be set with this command once the style has been configured.
policy-map
This command establishes a new DiffServ policy. The <policyname> parameter is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy.
The type of policy is specific to the inbound traffic direction as indicated by the in parameter
Note: The CLI mode is changed to Policy-Map Config when this command
is successfully executed.
Policy-Class-Map Config
Drop, Mark (all forms)
Format police-two-rate {<1-4294967295> <1-128> <1-4294967295> <1-128>
conform-action {drop | set-cos-as-sec-cos | set-cos-transmit <0-7>
| set-sec-cos-transmit <0-7> | set-prec-transmit <0-7> |
set-dscp-transmit <0-63> | transmit} exceed-action {drop |
set-cos-as-sec-cos | set-cos-transmit <0-7> | set-sec-cos-transmit
<0-7> | set-prec-transmit <0-7> | set-dscp-transmit <0-63> |
transmit} violate-action {drop | set-cos-as-sec-cos |
set-cos-transmit <0-7> | set-sec-cos-transmit <0-7> |
set-prec-transmit <0-7> | set-dscp-transmit <0-63> | transmit}}
Mode Policy-Class-Map Config