Filter
Top Products
Management Commands
679
ProSafe Managed Switch
username, then the managed switch sends the username input as the domain-name(as
entered by the user)\username to the RADIUS server.
• Domain disabled: In this case, the domain name is not included when the user-name is
sent to the RADIUS server.
Note: If the user domain is already provided by the user/supplicant, the
domain name is assumed to reach the managed switch along with
the username in the following format:
"Domainname \username"
Format domain-name <name>
Mode
no domain-name
This command is used to disable the domain-name in the managed switch.
Format no domain-name
Mode
domain-name enable
This command enables the domain name functionality.
Format domain-name enable
Mode
no domain-name enable
This command disables the domain name functionality.
Format no domain-name enable
Mode
mac address-table multicast forbidden-unregistered vlan
Use this command to forbid forwarding unregistered multicast addresses (in other words,
unknown multicast traffic) on a given VLAN ID.
Global Config
Global Config
Global Config
Global Config
Default
Disabled