Filter
Top Products
Routing Commands
297
ProSafe Managed Switch
no ip ospf authentication
This command sets the default OSPF Authentication Type for the specified interface.
Format no ip ospf authentication
Mode
ip ospf cost
This command configures the cost on an OSPF interface. The <cost> parameter has a
range of 1 to 65535.
Default
Format ip ospf cost <1-65535>
Mode
no ip ospf cost
This command configures the default cost on an OSPF interface.
Format no ip ospf cost
Mode
ip ospf database-filter all out
Use this command in Interface Configuration mode to disable OSPFv2 LSA flooding on an
interface.
Default
Format
ip ospf database-filter all out
Mode
no ip ospf database-filter all out
Use this command in Interface Configuration mode to enable OSPFv2 LSA flooding on an
interface.
Default
Format
no ip ospf database-filter all out
Mode
Interface Config
10
Interface Config
Interface Config
Disabled
Interface Configuration
Disabled
Interface Configuration