Filter
Top Products
Switching Commands
188
ProSafe Managed Switch
no set mld querier
Use this command to disable MLD Snooping Querier on the system. Use the optional
parameter address to reset the querier address.
no set mld querier [vlan-id][address]
• Global Config
• VLAN Mode
set mld querier query_interval
Use this command to set the MLD Querier Query Interval time. This is the amount of time in
seconds that the switch waits before sending another general query.
no set mld querier query_interval
Use this command to set the MLD Querier Query Interval time to its default value.
set mld querier timer expiry
Use this command to set the MLD Querier timer expiration period. This is the time period that
the switch remains in Non-Querier mode once it discovers that there is a Multicast Querier in
the network.
no set mld querier timer expiry
Use this command to set the MLD Querier timer expiration period to its default value.
Format
Mode
Default disabled
Format set mld querier query_interval <1-18000>
Mode Global Config
Format no set mld querier query_interval
Mode Global Config
Default 60 seconds
Format set mld querier timer expiry <60-300>
Mode Global Config
Format no set mld querier timer expiry
Mode Global Config