Filter
Top Products
Stacking Commands
29
ProSafe Managed Switch
show supported switchtype
This commands displays information about all supported switch types or a specific switch
type.
• User EXEC
• Privileged EXEC
If you do not supply a value for <switchindex>, the following output appears:
If you supply a value for <switchindex>, the following output appears:
Stacking Commands
This section describes the commands you use to view and configure stacking information.
stack-port
This command sets stacking per port to either stack or ethernet mode.
Format show supported switchtype [<switchindex>]
Modes
Term Definition
Switch Index (SID) The index into the database of supported switch types. This index is used when
preconfiguring a member to be added to the stack.
Model Identifier The model identifier for the supported switch type.
Management
Preference
The management preference value of the switch type.
Code Version The code load target identifier of the switch type.
Term Definition
Switch Type The 32-bit numeric switch type for the supported switch.
Model Identifier The model identifier for the supported switch type.
Switch
Description
The description for the supported switch type.
Default stack
Format stack-port <unit/slot/port> [{ethernet | stack}]
Mode Stack Global Config