NETGEAR GSM7228PS-100NAS Switch User Manual


 
Quality of Service (QoS) Commands
490
ProSafe Managed Switch
show policy-map interface
This command displays policy-oriented statistics information for the specified interface and
direction. The <unit/slot/port> parameter specifies a valid interface for the system.
Note: This command is only allowed while the DiffServ administrative
mode is enabled.
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets
show service-policy
This command displays a summary of policy-oriented statistics information for all interfaces in
the specified direction.
Format show service-policy {in|out}
Mode
OperStatus
The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.
Format show policy-map interface <unit/slot/port> [in | out]
Mode
Privileged EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Direction
The traffic direction of this interface service.
Operational
Status
The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.
Term Definition
The name of this class instance.
A count of the packets discarded for this class instance for any reason due to DiffServ
treatment of the traffic class.
Privileged EXEC
Term Definition