Filter
Top Products
Utility Commands
555
ProSafe Managed Switch
show logging traplogs
This command displays SNMP trap events and statistics.
Format show logging traplogs
Mode
Number of
Traps Since
Last Reset
Trap Log
Capacity
Number of
Traps Since Log
Last Viewed
Log
System Time Up
Trap
logging persistent
Use this command to configure the Persistent logging for the switch. The severity level of
logging messages is specified at severity level. Possible values for severity level are
(emergency|0, alert|1, critical|2, error|3, warning|4, notice|5,
info|6, debug|7).
Default
Format logging persistent <severity level>
Mode
Severity Level
The minimum severity to log to the specified address. The possible values are
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug
(7).
Port
The server port number, which is the port on the local host from which syslog messages
are sent.
Host Status
The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
Privileged EXEC
Term Definition
The number of traps since the last boot.
The number of traps the system can retain.
The number of new traps since the command was last executed.
The log number.
How long the system had been running at the time the trap was sent.
The text of the trap message.
Disable
Global Config
Term Definition