NETGEAR GSM7228PS-100NAS Switch User Manual


 
2
ProSafe Managed Switch
© 2012 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online,
visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): See Support information card.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are
trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are
registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or
trademarks of their respective holders.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
Revision History
Publication Part
Number
Version Publish Date Comments
202-11054-02 1.0 November 2012 Added mixed stacking commands.
202-11054-01 1.0 August 2012 Replaced the private group commands with
private VLAN commands, replaced the
Auto-Voice over IP Commands chapter, and
added iSCSI commands.
202-10936-02 1.0 January 2012 Added clear event log, ip local-proxy-arp, and
spanning-tree auto-edge. Removed poe reset
auto.
202-10936-01 1.0 November 2011 Added PoE and MVR mode features.
202-10515-05 1.1 June 2011 Added DHCPv6 and DHCPv6 mode features.
202-10515-04 1.0 November 2010 New document template.
202-10515-03 v 1.0 June 2010 Move some content to the Software Setup
Guide.
202-10515-02 Software release 8.0.2: new firmware with
DHCP L3 Relay, color conform policy, DHCP
server in dynamic mode, and configuring a
stacking port as an Ethernet port.
202-10515-01 Original publication.