Filter
Top Products
IP Multicast Commands
355
ProSafe Managed Switch
<groupaddress> is the group address supported by the RP. The parameter <groupmask>
is the group mask for the group address. The optional keyword override indicates that if
there is a conflict, the RP configured with this command prevails over the RP learned by
BSR.
Default
Format ip pim rp-address <rp-address> <group-address> <group-mask>
[override]
Mode
no ip pim rp-address
This command is used to statically remove the RP address for one or more multicast groups.
Format no ip pim rp-address <rp-address> <group-address> <group-mask>
[override]
Mode
ip pim rp-candidate
This command is used to configure the router to advertise itself as a PIM candidate
rendezvous point (RP) to the bootstrap router (BSR).
Format ip pim rp-candidate interface <interface-num> <group-address>
<group-mask> {interval <interval>}
Mode
interface-num
group-address,
group-mask
interval
no ip pim rp-candidate
This command is used to disable the router to advertise itself as a PIM candidate rendezvous
point (RP) to the bootstrap router (BSR).
Format no ip pim rp-candidate interface <interface-num>
Mode
disabled
Global Config
Global Config
Global Config
Parameter Description
The IP address associated with this interface type and number is advertised as a
candidate RP address. This interface must be enabled with PIM.
The multicast group address and prefix that are advertised in association with the RP
address.
(Optional) Indicates the RP candidate advertisement interval. The range is from 1 to
16383 seconds. The default is 60 seconds.
Global Config