Filter
Top Products
Stacking Commands
27
ProSafe Managed Switch
show supported cardtype
This commands displays information about all card types or specific card types supported in
the system.
If you do not supply a value for <cardindex>, the following output appears:
If you supply a value for <cardindex>, the following output appears:
show switch
This command displays information about all units in the stack or a single unit when you
specify the unit value. For units that would normally be allowed to join the stack but do not
have a matching stack template ID, their switch status is shown as “STM Mismatch.”
When you do not specify a value for <unit>, the following information appears:
Format show supported cardtype [<cardindex>]
Mode User EXEC
Term Definition
Card Index (CID) The index into the database of the supported card types. This index is used when
preconfiguring a slot.
Card Model
Identifier
The model identifier for the supported card type.
Term Definition
Card Type The 32-bit numeric card type for the supported card.
Model Identifier The model identifier for the supported card type.
Card Description The description for the supported card type.
Format show switch [<unit>]
Mode Privileged EXEC
Term Definition
Switch The unit identifier assigned to the switch.
Term Definition
Management
Status
Indicates whether the switch is the Primary Management Unit, a stack member, or the
status is unassigned.
Preconfigured
Model Identifier
The model identifier of a preconfigured switch ready to join the stack. The Model
Identifier is a 32-character field assigned by the device manufacturer to identify the
device.