Filter
Top Products
Switching Commands
88
ProSafe Managed Switch
no switchport private-vlan
This command is used to remove the private-VLAN association or mapping from the port.
switchport mode private-vlan
This command is used to configure a port as a promiscuous or host private VLAN port. Note
that the properties of each mode can be configured even when the switch is not in that mode.
However, they will only be applicable once the switch is in that particular mode.
Format switchport mode private-vlan {host | promiscuous}
Mode
Default
host
promiscuous
no switchport mode
This command is used to remove the private-VLAN association or mapping from the port.
Format no switchport mode private-vlan
Mode
private-vlan
This command is used to configure the private VLANs and to configure the association
between the primary private VLAN and secondary VLANs.
Format private-vlan {association [add | remove] <secondary-vlan-list> |
community | isolated | primary}
Mode
Format no switchport private-vlan {host-association | mapping}
Mode
Interface Config
Interface Config
General
Term Definition
Configures an interface as a private VLAN host port. It can be either isolated or
community port depending on the secondary VLAN it is associated with.
Configures an interface as a private VLAN promiscuous port. The promiscuous ports
are members of the primary VLAN.
Interface Config
VLAN Config
Term Definition
association
Associates the primary and secondary VLAN.
secondary-vlan-list
A list of secondary VLANs to be mapped to a primary VLAN.
community
Designates a VLAN as a community VLAN.