Filter
Top Products
Switching Commands
178
ProSafe Managed Switch
set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time. It is the amount of time in
seconds that the switch waits before sending another general query.
Default
Format set igmp querier query-interval <1-18000>
Mode
no set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time to its default value.
Format no set igmp querier query-interval
Mode
set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period. It is the time period that
the switch remains in Non-Querier mode once it has discovered that there is a Multicast
Querier in the network.
Default
Format set igmp querier timer expiry <60-300>
Mode
no set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period to its default value.
Format no set igmp querier timer expiry
Mode
set igmp querier version
Use this command to set the IGMP version of the query that the snooping switch is going to
send periodically.
Default
Format set igmp querier version <1-2>
Mode
disabled
Global Config
Global Config
60 seconds
Global Config
Global Config
1
Global Config