Filter
Top Products
Switching Commands
158
ProSafe Managed Switch
1/0/20 0 0 0
clear ip dhcp snooping binding
Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific
interface.
Format clear ip dhcp snooping binding [interface <unit/slot/port>]
Mode
• Privileged EXEC
• User EXEC
clear ip dhcp snooping statistics
Use this command to clear all DHCP Snooping statistics.
Format clear ip dhcp snooping statistics
Mode
• Privileged EXEC
• User EXEC
show ip verify source
Use this command to display the IPSG configurations on all ports.
Format show ip verify source
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(switch) #show ip verify source
Interface Filter Type IP Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
Term Definition
Interface
Interface address in unit/slot/port format.
Filter Type
Is one of two values:
• ip-mac: User has configured MAC address filtering on this interface.
• ip: Only IP address filtering on this interface.
IP Address
IP address of the interface
MAC Address
If MAC address filtering is not configured on the interface, the MAC Address field is
empty. If port security is disabled on the interface, then the MAC Address field displays
“permit-all.”
VLAN
The VLAN for the binding rule.