Filter
Top Products
GENERAL DESCRIPTION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1–3
Specifications
Sheet, book, 3-D object (2 kg/2.204 lb. max.)
A3 (297 x 420 mm)
DIRECT, 2R2E (Table 1-1);
zoom between 49% and 204% (fine zooming provided)
30 sec
9.7 sec (approx.; A4, DIRECT, non-AE, cassette 1)
100 copies (max.; upper limit may be changed in service
mode)
See Table 1-202.
Cassette: A3 to A5
Manual: A3 to postcard
Plain paper (64g to 80 g/m
2
), tracing paper
*1
, colored paper
*1
,
recycled paper (64 to 80 g/m
2
), eco paper (80 g/m
2
)
Plain paper (64 to 80 g/m
2
), tracing paper
*1
, colored paper
*1
,
recycled paper (64 to 80 g/m
2
), eco paper (80 g/m
2 *1
), trans-
parency
*3
, postcard, label sheet
*1
, Thick paper (81 to 128 g/m
2
)
Plain paper (64 to 80 g/m
2
), colored paper, postcard, recycled
paper (64 to 80 g/m
2
), eco paper (80 g/m
2
)
34 mm deep (approx.; about 250 sheets of 80 g/m
2
); no claw,
front loading (center reference)
5 mm (max. stacking height; i.e., about 50 sheets of 80 g/m
2
);
no claw (center reference)
100 sheets (approx.: A3, 80 g/m
2
)
2.0 ±1.0 mm (leading edge); 2.5 ±1.5 mm (left/right, trailing edge)
2.0 ±1.0 mm (leading edge); 3.5 ±1.5 mm (left/right, trailing edge)
Provided (2 min standard; may be varied in 1-min increments
between 1 and 9 min; may be deactivated)
Provided (5 min standard; 2, 5, 10, 15, 30, 60, or 120 min;
may be varied in user mode)
Cassette Feeding Module-B2, Cassette Feeding Module-A2,
Cassette Feeding Unit-K1, Control Card IV N, Stapler Sorter-
D2, Sorter 10-B1, ADF-E1, RDF-F1, Paper Deck Pedestal-
K1, Remote Diagnostic Device II
Copy paper type
Item
Original type
Maximum original size
Reproduction ratio
Wait time
First copy time
Continuous copying
Copying speed
Copy size
Cassette
Manual
Two-sided/overlay copying
*2
Cassette
Multifeeder
Copy tray
Non-image width One-sided
Multifeeder
Auto clear
Auto power-off
Options
3. Performance
*1 Canon recommended paper.
*2 If in manual mode, remove curling before second feeding.
*3 Fan out sheets before setting to eliminate adhesion.