Filter
Top Products
GENERAL DESCRIPTION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1–33
B. Cleaning the Static Charge
Eliminator
1) Open the front door.
• Remove any originals that have been placed
on top of the copier so that they do not fall off
when you open the main unit.
2) Lift the green lever on the left side to open the
top of the main unit.
3) With two fingers, grip the finger grip located on
the front part of the static charge eliminator.
Lift and pull out the static charge eliminator from
the copier.
Note:
Do not touch the purple coloured surface of the
drum; doing so will adversely affect the copy
quality.
Figure1-538
4) Using the static charge eliminator cleaning brush
(attached to the back side of the front door),
sweep clean the slot on the static charge
eliminator.
• The static charge eliminator cleaning brush is
very small and easy to lose, so it is
recommended that you return it to its storage
location on the back side of the front door after
you have finished cleaning the slot on the
static charge eliminator.
Figure1-539
Figure1-540
5) With two fingers grip the finger grip of the static
charge eliminator.
Insert the static charge eliminator back into the
copier until you hear a click.
Note:
Be careful not to touch the purple-colored surface
on the drum of the main unit as doing so will
prevent clear copies from being made.
Figure1-541
6) Securely close the top of the main unit.
• You cannot close the front door until the main
unit is closed.
7) Securely close the front door.
• If the Sorter or Stapler Sorter (options) is
attached, after closing the main unit, return it
to its original position.
• You cannot operate the copier if the front door
is open.
Drum
Cleaning brush