Filter
Top Products
5–1
INSTALLATION
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
I. SELECTING THE SITE
Keep the following in mind when selecting the
site of installation; if possible, pay a visit to the
user’s before the delivery of the machine.
• The site must provide a power outlet that may be
used exclusively for the machine and that meets
the rating ±10%.
• The site must be 45.5° to 90.5°F (7.5° to 30°C) in
temperature and 10% to 80% in humidity. In
particular, avoid areas near water faucets, boil-
ers, humidifiers, or refrigerators.
• Avoid areas near sources of fire, areas subject to
dust or ammonium gas, or areas exposed to the
direct rays of the sun; if necessary, provide cur-
tains to shut out the sun.
• The site must be well ventilated.
• Make sure that the floor will remain in contact with
the copier’s feet and will keep the copier level.
• Make sure that there will be work space that
meets the measurements shown in Figure 5-101;
in other words, there must be distances A and B
around the copier when measured with its front
door open.
B
AA
A
A: 19.7in./50cm
B: 3.9in./10cm
Figure 5-101