Filter
Top Products
4–33
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
11.Adjusting the Pressure of the Sepa-
ration Roller
If double feeding or pick-up failure occurs fre-
quently during pick-up operation, adjust the posi-
tion of the pressure spring for the separation roller.
q if double feeding is frequent, move the hook of
the spring toward A.
w if pick-up failure is frequent, move the hook of
the spring toward B.
Figure 4-371
12.Position of the Pick-Up Roller Re-
leasing Solenoid
Install the solenoid so that the pick-up roller arm
q butts against the upper stay w when the plunger
of the solenoid is pushed in.
Figure 4-372
3
2
1
4
A
B
Butted.
Butted.
2
1