Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5
INSTALLATION
VI. CASSETTE HEATER KIT 5 INSTALLATION
PROCEDURE .......................................... 5-16
A. Unpacking.......................................... 5-16
B. Installation (to copying machine)....... 5-17
C. Installation (to a cassette Feeding Module-
A2/B2/Cassette Feeding Unit-K1) ....... 5-20
VII. CASSETTE HEATER KIT 7 INSTALLATION
PROCEDURE .......................................... 5-24
A. Unpacking.......................................... 5-24
B. Installation ......................................... 5-25
C. Attaching the Ratings Label .............. 5-27
VIII.INSTALLING THE REMOTE
DIAGNOSTIC DEVICE II ......................... 5-28
A. Unpacking.......................................... 5-28
B. Installing to the Copier....................... 5-28
The machine is precisely adjusted and strictly inspected before shipment, and it is important to
install the machine so that it retains its pre-shipment performance.
The service person is expected to install the machine based on a full understanding of its
mechanisms and run necessary checks after installation.
I. SELECTING THE SITE ............................. 5-1
II. UNPACKING AND INSTALLING THE
COPIER ..................................................... 5-2
A. Unpacking and Removing Fixings....... 5-2
B. Turning On the Copier ......................... 5-5
C. Checking the Images and
Operations ........................................... 5-7
D. Attaching the Drum Unit ...................... 5-8
E. Changing the Cassette Size ................ 5-9
III. RELOCATING THE COPIER .................. 5-11
IV. REPLACING THE DRUM UNIT .............. 5-12
V. INSTALLING THE CONTROL
CARD IV N............................................... 5-14