Filter
Top Products
4–4
COPYRIGHT
©
1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
E. Counter*
* This may not be available for sale in same areas.
1. Installing the Option Counter (CNT2)
1) Open the top body.
2) Remove the inside upper cover.
3) Remove the two screws w, and disconnect the
connector e; then, remove the counter mount
q.
Figure 4-114
4) Put the option counter r in the counter mount.
Figure 4-115
5) Install the counter mount to the copier with two
screws.
6) Connect the two connectors t of the counter.
Figure 4-116
7) Set SW303 on the DC controller as indicated in
Table 4-101.
Counter
Large size copy counter
Duplexing unit counter
Small size copy counter
No counter
Description
SW303 settings determines
how the option counter (CNT2)
behaves.
SW303
Table 4-101
2
1
ON OFF
ON OFF
2
1
ON OFF
2
1
ON OFF
2
1
4
3
2
1
5